Kit Assembly - Metra 95-8721B Instrucciones De Instalación

Dash Disassembly
5. C-Class only: Unclip and remove
the vent assembly. (Figure E)
6. Unclip and remove the push button
panel above the radio (Figure F)
7. Remove (4) Torx screws securing
factory radio then remove the unit.
(Figure G)
8. Remove the two metal clips on the
bottom of the factory radio and
place them on the bottom tabs of
the radio housing trim panel.
Continue to kit assembly
(Figure E)
(Figure F)
(Figure G)
95-8721B
Double DIN radio provision
1. Attach the brackets to the radio
housing trim panel trim plate with
the supplied #8 x 3/8" screws.
(Figure A)
2. From the back, slide the Double
DIN radio into the bracket/radio
housing assembly and secure
using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.
3

Kit Assembly

(Figure A)
(Figure B)