Metra 99-7620B Instrucciones De Instalación página 4

NOTE: All accessories, switches, and
especially air bag indicator lights must
be plugged in before reconnecting the
battery or cycling the ignition.
1. Using the model specific set of screen
brackets, mount the factory screen
and control box back into
the dash with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
Note: It may be necessary to
file the inside edges of the top
two screen mount locations to
accommodate the screen.
(Figure A)
2. Using factory hardware, mount the
center control panel and outboard
switches to the factory dash panel.
Leave the inner top mounting screws
out until the next step. (Figure B)
HAND TOOLS ARE RECOMMENDED
3. Mount the model specific radio
brackets to the factory dash panel.
(Figure C)
Kit Assembly
(Figure A)
(Figure B)
99-7620B
4. For ISO DIN installations only,
mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8" Phillips screws
supplied. (Figure D)
5. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure E)
6. Continue to Wiring and Interface
Installation section of this manual.
(Figure C)
4
(Figure D)
(Figure E)