Horizon Global 76424 Instrucciones De Instalación página 4

1. Lower vehicle exhaust - Using an exhaust hanger removal tool, lower muffler by removing (1) rearmost driver side rubber hanger and (1) rearmost passenger
side rubber hanger. NOTE: Be sure that exhaust is supported before removing rubber hangers. A spray lubricant or soapy water on rubber hangers makes
them slide off metal pins more easily.
2. Trim Heat Shield – Remove (4) screws securing heat shield and trim as shown in Figure 3. Return screws and trimmed area to owner. NOTE: Heatshield
doesn't require to be fully taken off to trim.
Trim Line
©2020 Horizon Global™ Corp - Printed in Mexico
Figure 3
Sheet 4 of 18 76424NP 9-15-20 Rev. A