Horizon Global 76424 Instrucciones De Instalación página 5

3. Enlarge forward slot – Open up the access hole using a die grinder on the driver and passenger side to fit the head of the 1/2 " carriage bolt.
4. Install hitch – Using the supplied pullwires
pullwires attached. Raise the hitch into position and align holes in hitch bracket to the carriage bolts installed, guiding the pullwire ends through holes in the hitch
bracket. Remove pullwires, install conical washers
5. Tighten all ½"-13 Gr 5 fasteners with torque wrench to 75 Ft.Lb. (102 N*M)
©2020 Horizon Global™ Corp - Printed in Mexico
n
install the carriage bolts ①and spacers ② into the vehicle frame through the access hole, see Fig. 2, leave
l
(teeth side toward hitch) and nuts
⑤
Kink pullwire to keep spacer independent of
bolt
Figure 2
Proper torque is needed to keep the hitch secure to the vehicle when towing.
m
, see Figure 1.
Access Hole
Sheet 5 of 18 76424NP 9-15-20 Rev. A