Beta 1860E/120A Manual De Instrucciones página 18

OPERATING AND MAINTENANCE MANUAL
Other spare parts could cause equipment malfunction.
The use of non-original spare parts will also result in the
warranty provisions becoming null and void, releasing
the manufacturer
malfunction or damage resulting as a consequence of
such action.
WELDING OPERATION
SAFETY INSTRUCTIONS
and bystanders if the safety warnings and instructions
PERSONNEL PROTECTIION
Together with the previous instructions, the following
precautions should be strictly observed.
protect your neck, your face and the sides of your head.
Keep the front lens clean and replace it if it is broken or
cracked. Place a transparent protection glass between
the mask and the welding area.
clothing.
VENTILATION
Weld in a well-vetilated environment
that does not have direct ac
cess to other work areas.
EYE PROTECTION
NEVER look at the arc without
appropriate eye protection.
FUMES AND GASES 1
Clean away paint, rust or any other
dirt from the item to be welded to
avoid the creation of dangerous fumes.
18
All manuals and user guides at all-guides.com
SPARE PARTS
Use only manufacturerre-
commended spare parts.
from any responsibility
CAUTION !
Welding processes can be
dangerous for the operator
PROTECTION MASK
Wear a protective nonfl am-
mable welding mask to
CLOTHING
Wear close-fi tting, closed,
non-fl ammable, pocketless
graphite, heavy metals, cadmium or beryllium un-
less the operator and the bystanders use appro-
priate airsupplied respirators.
for
HIGH VOLTAGE PROTECTION
Together with the previous instructions, the fol-
lowing precautions should be strictly observed
outside the area where welding will take place and
attach the grounding clamp to the part to be welded.
and the welding cables.)
opened, always checked they are closed tightly
before starting any work.
FIRE PREVENTION
Together with the previous instructions, the following
precautions should be strictly observed. Welding
operations require high temperatures therefore the
risk of fi re is great.
used during welding MUST have fi reproof surfaces.
surrounding the welding environment must be
shieldedusing non-fl ammable materials. This not
only reduces the risk of fi re but also avoids damage
to the walls and fl oors during welding processes.
FUMES AND GASES
NEVER weld on metals contai-
ning zinc, mercury, chromium,
CONFINED SPACES
When welding in small environ-
ments, leave the power source
HUMIDITY
Never weld in wet or humid
environments.
DAMAGED CABLES
Never use damaged cables.
(This applies to both the power
DAMAGED CABLES
Never remove the unit side pa-
nels. If the side panels can be
WORK-AREA FLOORING
The work-area fl ooring
MUST be fi reproof
WORK-AREA
SURFACES
Work benches or tables
WALL AND FLOOR
PROTECTION
The walls and fl ooring
EN
2