Setting The Rotation Speed (Actual Value Displays Of All Modes) - Heidolph Hei-VAP Precision Instrucciones De Funcionamiento Originales

6.3 Setting the rotation speed (actual value displays of all
modes)
The unit is switched on.
The rotation is switched off (pushbutton Rotation start/stop).
Actual value display
The range can be set from 10 - 280 [rpm] in 1 [rpm] increments.
100 [rpm] are set as default when shipping from the factory.
1. Select the entry "rotation" by turning the Hei-GUIDE (6) and call up the selected
entry to be changed by pressing the Hei-GUIDE (6) again.
2. Turn the rotary pushbutton controller Hei-GUIDE (6) to set the desired rotation
speed. The rotation speed is readjusted synchronously as an active rotation.
3. Pressing it again confirms the change. The entry is exited after 10 seconds, in order
to rule out accidental adjustments.
4. Activate the Rotation start/stop (5) pushbutton to start the rotation.
The set speed appears on the screen.
Hei-VAP Precision
Operation of the Hei-VAP Precision
EN
47