HURAKAN TMC Manual De Instruccion página 22

ROTATION
The here follow operations must be performed from the machine maintenance man (personnel qualified in the
electrical maintenance sector of the industrial machines).
For machines fed with three phase voltage (3 PE AC 400V 50Hz), place laterally the machine and switching
on it check through the unloading zone the tool rotation. During the switching on verify that the tool rotates in
anticlockwise.
In the case there is a clockwise rotation, switch off the machine disconnecting the plug, disassembly,
disconnect two phase conductors and invert them of position.
FUNCTIONING DESCRIPTION
The control devices are designed and manufactured so as to be sure and reliable and resistant to the normal stresses of service,
to the foreseeable efforts and to the external agents. They are besides visible, identifiable and labeled from a suitable mark.
Here follow the following control devices are listed:
TYPE / COLOR
Button / black
"O" / Button for the machine stop control
Button / white
"I" / Button for the machine starting control
STARTING
The machine starting is possible only with a voluntary action on the control device foreseen for this aim: white button "I"
for the machine starting control.
STOP
For the stop control push the black button "O". In case of temporary or prolonged stop, before to replace in function the
machine, all fed products must be taken away within the machine: follow the indications about the grinding group disassembly.
FUNCTIONING SAFETY
If the machine is sottosforzo, or is submitted to very long functioning periods or to overcharging, the same machine stops
immediately for the entry in function of the thermal protection. In this case wait that it is completely cooled before
proceeding to the starting functioning.
VOLTAGE ABSENCE
In case of electric feeling break or if the machine is disconnected from the electric net, this last one will be able to be restarted
only following the starting function, after the electric feeding back or the electric net refasten.
MOVING SHELTER OPENING
Slacking the block knob and opening the moving shelter the machine stops immediately for the entry in function of the safety
micro switch.
The machine can be restarted only closing the moving and blocking it with the appropriate knob and following successively the
starting function.
CHECKS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CHECK
Check that:
 There aren't on the machine extraneous objects, within
the hopper, within the machine neck and in
correspondence of the product exit zone
Check the cleaning:
 of the machine internal parts
 of the tools case group, the tool and the moving shelter
 of the pestle
 of the machine external surface
Check the integrity:
 of the fixed protections,
 of the loading hopper and the fixed shelter
 of the machine neck
 of the moving shelter and of the fixed shelter in the
unloading zone
 of the machine body
REFERENCE / DECRIPTION
MODALITY AND COMPARISONS
Sight control of the indicated parts, to check of objects or extraneous bodies
lacking as for example different tools, clothes, etc ... and that there isn't
however the food product.
In case of presence provide to their removal.
All indicated parts surfaces, before the machine use must be checked
visually to verify their cleaning.
For the sight control of the cutting zone internal parts remove the superior
cover.
In case of molds presence or other type of dirtiness, provide with the
cleaning procedure in accordance with the charter 5 indications.
All fixed and moving protections, etc.. must perform the function for which
have been foreseen. Indicated parts sight check to verify their integrity in
their surface external part. The parts must be however changed at the first
erosion signals or breaking (Authorized Assistance Centre).
ORIGINAL INSTRUCTIONS TRANSLATION
Pag di
9 13