How To Use - Eureka Mighty Mit 3670 Serie Guia Del Propietario

G
L
G
J
G
B
10
G
K
G
M
ENGLISH

HOW TO USE

CAUTION: Do not plug in cleaner until you
To Clean Bare Floors and Rugs
Step 1: Attach wands to hose handle.
Step 2: Place floor tool on end of wand.
Step 3: For models with telescopic wands, extend wands
by pushing lock button down and pulling on lower
FIG. 6
wand until reaching desired height (Fig. 6).
G
Step 4: Adjust to maximum suction by closing the slip ring
K
Step 5: Rotate swivel cord hook
to release cord (Fig. 7).
Step 6: Plug cord into appropriate outlet.
Step 7: Push on/off switch
Press again to turn off (Fig. 8).
To Clean Stairs, Upholstery and
Window Treatments
(see pages 6-7 for accessory details)
Step 1: Attach combination tool, crevice tool or turbo
FIG. 7
nozzle (on some models only) to the end of the
hose. If additional reach is needed place wand on
hose handle first.
G
Step 2: Adjust to minimum suction by opening the slip ring
K
Step 3: Rotate swivel cord hook
to release cord (Fig. 7).
Step 4: Plug cord into an appropriate outlet.
Step 5: Push on/off switch
Press again to turn off (Fig. 8).
To Use Blower Port
FIG. 8 Step 1: Remove HEPA filter (on some models only). See
pages 14-15 for details.
Step 2: Detach hose
attach to the blower port
the canister (Fig. 9).
Step 3: Rotate swivel cord hook
to release cord (Fig. 7).
Step 4: Plug cord into appropriate outlet.
G
Step 5: Push on/off switch
Press again to turn off (Fig. 8).
A
FIG. 9
understand all controls and features.
G
on the hose handle (Fig. 6).
L
G
M
. Press once to turn on.
G
on the hose handle (Fig. 6).
L
G
M
. Press once to turn on.
G
G
B
from front of canister
J
G
L
G
M
. Press once to turn on.
on bottom of canister
on bottom of canister
G
A
and
on the back side of
on bottom of canister