ENGLISH
PROBLEM SOLVING
Note: Turn off the switch and unplug the electrical cord before servicing.
Problem
Motor will not start
No suction at end
of hose
Reduced suction
Cleaner shuts off
General questions
16
Cause
Electric plug
Power switch not turned "ON"
Full paper bag
Paper bag clogged
Hose clogged
Front cover not latched
Full paper bag
Slip ring open
Hose clogged
Internal safety thermostat trips
(see page 4 for details)
Assembly or related attachments
Solution
• Push plug securely into outlet
• Try another outlet
• Check circuit breaker
• Make sure power switch is "ON"
• Replace paper bag
• Replace paper bag
• Remove any clogs from hose that restrict airflow,
then try again
• Push front cover until it latches firmly
• Replace paper bag
• Rotate slip ring on wand until hole is covered
• Remove any clogs from hose that restrict airflow,
then try again
• Unplug cleaner and check for obstructions in hose,
wands and attachments
• Check for full paper bag
• Clean/replace motor filter
• Call 1-800-282-2886 between 8:00 a.m. to 7:30 p.m.
CST Monday through Friday and 10:00 a.m. to 6:30 p.m.
CST on Saturday. Know the Model number and Serial
number when you call.