Eureka Mighty Mit 3670 Serie Guia Del Propietario página 14

14
G
I
G
O
FIG. 13
G
P
G
I
G
Q
G
O
G
O
FIG. 14
G
R
FIG. 15
ENGLISH
To Replace HEPA Filter
Step 1: Grasp the bottom clips
Step 2: Pull out and down to release (Fig. 13).
Replace with
To Re-install HEPA Filter
G
I
Check the HEPA filter
change. Replace twice a year or after every six bag
changes as needed.
Step 1: Insert upper filter corner tabs
G
rear housing tabs
I
Step 2: Pivot filter down until bottom clips
click securely into place on the cleaner (Fig. 14).
To Clean the Motor Filter
CAUTION: Turn off vacuum and unplug the
electrical cord before cleaning the motor
filter. Never operate the vacuum cleaner
without the motor filter in place.
G
Step 1: Remove the dust bag. See pages 12-13 for details.
R
Step 2: Grasp filter
Step 3: Rinse under warm water.
Step 4: When all parts are completely dry, replace filter
and disposable dust bag (see pages 12-13 for
more details).
(on some models)
G G
O I
on the filter
filter, part number 60666.
(on some models)
with each disposable dust bag
G
G
P
firmly under
Q
(Fig. 14).
and pull out to remove (Fig. 15).
(Fig. 13).
G
O
on filter