Installing The Batteries; Operating Instructions - Kichler HATTERAS BAY Manual Del Usuario

INSTALLING THE BATTERIES

Remove the face plate of the Wall Switch by lifting at the top
and then insert the supplied 12V battery. Duracell MN21/
Eveready A23/GP 23A all 12V.
Replace the switch face plate.
To prevent possible damage to the transmitter, remove these
batteries if not used for long periods of time (months).

OPERATING INSTRUCTIONS

HI Button = High Speed
MED Button = Medium
LOW Button = Low Speed
FAN OFF Button = Motor Off
LIGHT Button = Light ON or OFF
REV Button = The "REV" button is
used to set the fan forward or reverse, press the button forward (for warm
weather) or reverse (for cool weather).
Speed settings for warm or cool weather depend on factors such as the
room size. Ceiling height, number of fans and so on.
NOTE: To operate the reverse function on this fan, press the reverse button
while the fan is running.
H
I
ME
D
LO
W
FAN OFF
ON
ECE
1 2 3 4
Fig. 21
Fig. 22
60" HATTERAS BAY
TM
PATIO LED | 17