Installing The Light Plate Assembly - Kichler Parlour LED 300320 Manual De Instrucciones

INSTALLING THE LIGHT PLATE ASSEMBLY

Step 1. Step 1. Remove one of three screws which preinstalled on mounting plate and Remove one of three screws which preinstalled on mounting plate and
keep for later use, loosen the other two (do not remove). Place the two slot keep for later use, loosen the other two (do not remove). Place the two slot
holes on the light plate assembly over the 2 screws previously loosened from holes on the light plate assembly over the 2 screws previously loosened from
Mounting Plate
the mounting plate. Rotate the light plate assembly until it locks in place at the mounting plate. Rotate the light plate assembly until it locks in place at
the narrow end of the key holes, secure by tightening the 2 screws previously the narrow end of the key holes, secure by tightening the 2 screws previously
loosened and the one previously removed. (Fig.19) loosened and the one previously removed. (Fig.19)
Screw
Fig. 19a
Light Plate Assembly
Screw
Fig. 19b
52" Parlour LED | 13