Nortek NDVT3000 Manual De Instrucciones página 15

If the screen saver is on, w hen your DVD player is in Stop, Open, or No Disc state, or there
is a frame frozen for more than 3 minutes, the screen saver will be displayed. This feature
can protect the screen from damage.
ON: Choose this setting to activate the screen saver.
OFF: Choose this setting to cancel the screen saver
8.1.3 HD OUTPUT
In this option, you can select different resolution. Under this condition, the VIDEO and TV
TYPE are both invalid. The default set is HD OFF.
When you change to the HDMI output with different reso lution from the normal video output,
a interface will be displayed. Select "yes" to confirm change, select "no" to exit.
8.1.4 VIDEO
TV-RGB: Cho ose this setting if your DVD player is connected to a TV with an RGB cable.
YUV: Choose this setting if your DVD player is connected to a TV with Y, Cb, Cr video
cables.
YPBPR: Choose this setting if your DVD player is connected to a progressive scan
P-SCAN
TV with Y, Cb, Cr video cables.
S-VIDEO : Choose this setting if your DVD player is connected to TV with S-Video cable.
Notes:When your DVD player output composite video, you can choose the settin g
randomly.Choose TV-RGB if your DVD player is connected to a RGB TV.
8.1.5 TV TYPE
16 : 9 (Wide Scree n): Choose this setting if your DVD player is connected to a wide screen
TV. If you choose this setting and you don't have a wide screen TV, the images on the
screen may appear distorted due to vertical compression.
4 : 3 LB (Letter Box): Choosing this setting if your DVD play er is connected to a normal ratio
TV. connector You'll see the movies in their original aspect ratio (height-to-width ratio). You'll
see the entire frame of the movie, but it will take up a smaller portion of the screen vertically.
The movie might appear with black bars at the top and bottom of the screen.
4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connecte d to a normal
ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of
the picture (the left and right edges) won't be seen.
Notes:The image display ratio is related to the rec orded disc format. Some disc can not
display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a
wide screen TV, black bars will appear on the left and right side of the screen.
You must adjust the screen setting depending on the type of the television you have.
8.1.6 PASSWORD
The password option i s initialized locked, and you cannot set the ratings limit or change the
password. In order for the Ratings feature work, the password mode must be turned on. If
you want to set the ratings limit, you will need to enter the default password, which is
0000(press the ANGLE button four times), then press Enter button to confirm.
8.1.7 RATING
e is a rating limit system, like movie ratings. It works with DVD discs that
The Rating featur
have been assigned a rating. This helps you control the types of DVDs that your family
watches.
There are these rating options: 1 KID SAFE,2 G,3 PG,4 PG13,5 PG-R,6 R,7 NC-17,8
ADULT.
GB-14