Language Setup; Audio Setup - Nortek NDVT3000 Manual De Instrucciones

Notes:If t he password option is locked, you cannot set the ratings limit; the rating limit doe
not work when the password option unlocked.
8.1.8 DEFAULT
Choose this option

8.2 LANGUAGE SETUP

The language setup options are i
8.2.1 Highlight the OSD LANGUAGE option, and
OSD language you prefer. Press ENTER button to confirm, and it will display OSD in that
language.
8.2.2 Highlig ht the AUDIO LANG option, and press the Arrow buttons to choose the audio
language you prefer. Press ENTER button to confirm. If the disc you are playing has that
language available, it will output audio in that language.
8.2.3 Highlight the SUBTITLE LANG option, and press
subtitle language you prefer. Press ENTER button to confirm. If the disc you are playing has
that language available, it will displays subtitles in that language.
8.2.4 Highlight the MENU LANG option, and press the Arrow butto
language you prefer. Press ENTER button to confirm. If the disc you are playing has that
language available, it will displays menu in that language
Notes:If your preferred language isn't available, the disc's d
8.2.5 Highlight the DIVX SUBTITLE option, and press the Arrow buttons to choose the
Subtitle you prefer. Press ENTER button to confirm.
Notes:If your preferred language isn't available, the dis

8.3 AUDIO SETUP

The audio setup options ar
8.3.1 Highlight the AUDIO OUT option, and p
output mode you prefer. Press ENTER button to confirm; There are 3 optional audio output
modes: SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF/OFF : From the Coaxial Output, no signal is o
HDMI has not audio output.
SPDIF/ RAW: Choose this se
a coaxial cable; When playing a disc recorded with Dolby Digital, DTS and MPEG audio
formats, the corresponding digital signals will be output from the Coaxial Output jack. This
player's digital output jacks are designed for a connection to a Dolby Digital, DTS , or MPEG
receiver or decoder.
SPDIF / PCM: Choos
stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be output from the
Coaxial Output jack. (The default set is SPDIF/PCM for the HDMI audio output )
8.3.2 KEY
Use the Up a nd Down arrow button to move the scroll and adjust the key.
8.3.3 GM5
1) GM5 audio effect function could process 2CH audio source into 5CH sound. The
different modes are achieved by different DSP operating method, and the effects
will be different, too.
2) GM5 can support CD
to resume all the setup options to default settings.
llustrated below:
e illustrated below:
tting if your DVD player is connected to a power amplifier with
e this setting if your DVD player is connected to a 2-channel digital
DA/MP3/VCD/AC3 2CH audio source.
press the Arrow buttons to choose the
the Arrow buttons to choose the
efault language will be played.
c's default language will be played.
ress the Arrow buttons to choose the audio
utput. If you select this option, the
GB-15
ns to choose the menu