Specification; Troubleshooting - Nortek NDVT3000 Manual De Instrucciones

1

0. Specification

Signal system
Frequency Response
Signal-to-Noisy Ratio
Audio Distortion+Noise
Audio Output(Analog audio)
Video Output
MAX Resolution
Power Supply
Dimensions
Supported Disc
USB
REFERENCE:
To protect your DVD pl
must be above 30 seconds.
No using for a period of time,
The player should be operated only on condition that the type of power supply co
to the marking label. Otherwise, it doesn't work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on aga
1

1. Troubleshooting

No picture:
Ensure that th e equipment is c
Connect the video cable securely into the appropri
Select the appropriate video input mode on the TV
Picture Distorted
The disc is dirty and
It is normal for some distortion to appear w
No Sound
Check the c onnections. Check the volume on the equipment you have co
Connect the audio cable securely into the appropriate jacks. Ensure that the input
for the television and stereo system are correct. If the player is in mute mode, please press
Mute button again to turn on sound.
No Stereo Sound Effect when playing video CD or CD
Check the connections
PAL/AUTO/NTSC
20HZ-20KHZ( at 1K
≥90 dB( at 1KHz 0 dB)
≤-60dB ( at 1KHz0dB)
+0
2.0
Composite:1.0±0.2Vp-p
Load impedance: 75Ω, im
>500 lines
~110-240V 50/60Hz
360(mm)X260(mm)X38(mm)
MPEG-4/Xvid/DVD/SVCD/VCD
Picture/Photo CD
2.0
ayer, the interval between two consecutive Power button operations
please pull out the plug from the electronic outlet.
onnected properly.
needs to be cleaned.
Hz 0 dB)
Vrms
-1..0
ate jacks.
hile Fast Motion Playback.
GB-26
balance, negative polarity
/CD/MP3/Kodak
in.
nnected.
rresponds
settings