Function Operation - Nortek NDVT3000 Manual De Instrucciones

DVB-T
Connect the RF coaxial
antenna cable to the
antenna socket, then
connect the other side
to the Antenna TV IN of
player, connect the
other RF coaxial to the
"TV ANTENNA OUT" of
the player then connect
to the TV antenna IN of
the TV.
DVD+ AV Amplifier:
Notes :
There are the following ways of connecting the player with amplifier:
left/right audio output
5.1 channel audio output
coaxial audio output
Warning:
Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3
or DTS decoder. Any attempt to do so and play of DVD disc will result in damaging your
speakers and causing possible hearing injury. Other than DVD disc, VCD and CD can be
operated normally without conforming to the above restriction.
Setting of TV system
If you find the image like non-fully zoomed picture, brim picture covered or black & white
picture etc, please select PAL or NTSC by systems setting or press N/P button to switch the
TV system on the remote control. This DVD disc is capable of supporting different scales
picture, as a result, non-full zoomed picture could appear or picture be partially covered on
user's TV set.

5. FUNCTION OPERATION

5.1 Function Buttons On the Front Panel
These button's function is the same as the corresponding buttons on the remote control. For
the detail information, please see the following texts.
5.2 Function Buttons On the Remote Control
Menu Play (compatible with DVD, SVCD, VCD2.0 discs)
Press Menu Button to display the DVD Root Menu or SVCD or VCD 2.0 menu.
When menu display, you can press Arrow buttons to highlight the menu item you want to
choose. Press Enter, you can begin to play with the highlighted item.
Title Play (compatible with DVD discs only)
During DVD playback, press Title button to display the DVD title content.
Sequence Play (compatible with DVD, SVCD, VCD, WMA, MP3/JPEG discs)
GB-8