NSK FX15 Manual Del Usuario página 5

immediately and contact your Authorized NSK Dealer.
• Depressing the Push Button while the handpiece is in operation
may cause overheating, serious technical damage and possible
premature handpiece failure. During operation avoid contact with
any oral tissue that may cause the Push Button to be depressed
while the handpiece is in operation.
• Do not use high acid water or sterilizing solutions to wipe, immerse
or clean the handpiece.
• The products are delivered in a non-sterile condition and must be
autoclaved prior to use.
• Perform regular function and maintenance checks.
• If the product is not used for a long period check it is functioning
correctly before using on a patient.
• To avoid clinical downtime it is recommended that a spare be kept
on hand in case of a breakdown during surgery.
• U.S. Federal law restricts this device to sale by or on the order of a
licensed physician.
2
3. Connection & Disconnection of the Handpiece and Motor
3-1 Connection
1) Connect the handpiece direct to the motor. (Fig.1)
2) Make sure the handpiece is firmly connected to the motor.
3-2 Disconnection
Hold the motor and the handpiece separately and disconnect with
care.
CAUTION
• Disconnect the handpiece only after the motor has completely
stopped rotating.
• Connect ONLY to E type motors (ISO 3964).
4. Insertion & Removal of the Bur/File
4-1 To Insert the Bur (FX15/FX15m/FX23/FX23m/FX25/FX25m)
1) Insert the bur until it is correctly seated in place.
2) Depress the Push Button and insert the bur into the chuck until the