Removing Or Replacing The Footboard - Stryker SV2 Manual Del Operador

English
Removing or replacing the headboard (Continued)
EN
3. Lower the headboard until it seats into the plastic sleeves (B)
Figure 1-14: Headboard orientation

Removing or replacing the footboard

WARNING
Always properly orient the footboard when replacing the footboard to avoid entrapment.
CAUTION
Always hang the nurse control pendant onto a foot end siderail or the linen tray (option) before removing the footboard.
You can remove the footboard for patient accessibility and cleaning.
To remove the footboard:
1. Hang the nurse control pendant onto a foot end siderail or the linen tray (optional).
2. Grasp the handles and lift the footboard straight up and off the product
To replace the footboard:
1. Align the curved footboard corners with the head end of the bed
2. Align the footboard pegs with the plastic sleeves at the foot end of the product
3. Lower the footboard until it seats into the plastic sleeves
1-24
Operation
(Figure 1-15 on page
B
Figure 1-15: Removing or replacing the headboard
(Figure 1-17 on page
(Figure 1-16 on page
(Figure 1-17 on page
KK-7500 REV 02
1-24).
A
A
B
1-25).
1-25).
(Figure 1-17 on page 1-25).
1-25).
www.stryker.com