Operation; Plugging Or Unplugging The Battery Cable - Stryker SV2 Manual Del Operador

English

Plugging or unplugging the battery cable

EN
To plug the battery cable into the control box:
1. Remove the upper leg rest cover (A)
page 1-16).
2. Locate the control box
3. Connect the battery cable to the control box.
4. Press the battery cable lock to lock the battery cable
into the control box (A)
To unplug the battery cable from the control box:
1. Remove the upper leg rest cover (A)
page 1-16).
2. Locate the control box
3. Unlock the battery control cable to the control box (A)
(Figure 1-4 on page
4. Disconnect the battery from the control box.
5. Using tape, secure the battery cable lock to the litter
frame (Figure 1-5 on page
1-16

Operation

(Figure 1-3 on
(Figure 1-4 on page 1-16).
(Figure 1-4 on page 1-16).
(Figure 1-3 on
(Figure 1-4 on page 1-16).
1-16).
1-16).
KK-7500 REV 02
Figure 1-3: Removing the upper leg rest cover
Figure 1-4: Locking or unlocking the battery cable
Figure 1-5: Unplugging the battery cable from the
control box
A
A
www.stryker.com