Remote Commander Rm-Jj100 - Sony JJTRON ADN-8118 Manual De Instrucciones

Location and Function of Parts and Controls

Remote Commander RM-JJ100

@¡
@º
!ª
!•
!¶
!§
!∞
1 LIGHT button
Illuminates the key indicators when the COMMAND
switch 5 is set to ON. If the COMMAND switch is
set to OFF, only the COMMAND switch is
illuminated.
The key indicators turn off if you press the LIGHT
button again.
If you do not press any key for more than 30 seconds,
the indicators also turn off automatically.
2 Transmission indicator
Lights each time you press a key. If it does not light,
replace the batteries with new ones.
3 STATUS ON/OFF keys
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
The menus appear even if the OFF key is pressed.
10
(GB)
1 2 3 4
LIGHT
MUTING STATUS COMMAND
OFF
PIC AUDIO OFF ON
ZOOM
COLOR
SIZE SHIFT
MATRIX
WIDE SCREEN MODE
STANDARD FULL ZOOM
INPUT SELECT
INPUT A INPUT B
RGB
VIDEO YUV RGB
5 7
6 8
ON
STANDBY
MEMORY
RESET FUNCTION
PICTURE CONTROL
SCREEN
BRIGHT CONTR BRIGHT
SHARP HUE COLOR VOLUME
4 SHIFT key
Enters the shift adjustment mode for the input signal.
Next adjust the position of the picture using the four
arrow keys qa. The picture shifts in the direction of the
arrow on the pressed key.
Press again to return to the normal screen.
5 COMMAND ON/OFF switch
No keys on the Remote Commander except the
LIGHT button 1 function when this switch is set to
OFF. This saves battery power when a button is
pressed inadvertently.
6 FUNCTION key
The key does not function with the unit.
7 MEMORY key
Stores various adjusted data into memory.
9
ON
MENU
0
!¡
ENTER
!™
!£
!¢