Selecting The Wide Screen Mode (Adn-8118 Only); Picture Size - Sony JJTRON ADN-8118 Manual De Instrucciones

Selecting the Wide Screen Mode (ADN-8118 only) and Adjusting the

Picture Size

You can change the picture size displayed on the screen.
You can also display a 4:3 aspect ratio picture in wide screen mode so that
it fills the screen of the unit with 16:9 aspect ratio (ADN-8118 only).
For ADN-8126, skip step 1 of the following procedure.
1
Select the screen mode with the STANDARD, FULL or ZOOM key
on the Remote Commander, or with the WIDESCREEN MODE button
on the unit.
The picture is displayed in the selected mode and the size adjustment
screen appears.
STANDARD: to display a 4:3 aspect ratio picture to fill the vertical
direction of the screen.
S T A N D A R D : 1 S T A N D A R D : 1
FULL: to display the picture to fill the whole screen with 16:9 aspect
ratio.
F U L L : 1 F U L L : 1
ZOOM: to display the picture to fill the horizontal direction of the
screen with 16:9 aspect ratio. (The picture will be off screen at the
top and bottom.)
Z O O M : 1 Z O O M : 1
2
Adjust the picture size with the ZOOM SIZE key on the Remote
Commander.
Each press selects one of four size options.
You can select one of four options each for video mode (1 to 4) and
VGA mode (5 to 8) when the 31.5k/60 Hz signal is input from the
INPUT A connectors.
3
Press the MEMORY key to save the screen mode and its adjustment
data.
You can select the screen mode and adjust the picture size with the menu.
For details, see "SCREEN CONTROL Menu" on page 24 (GB).
19
(GB)