Festo MH1 Serie Manual De Instrucciones página 20

Address assignment of the valves
– Assign the addresses in ascending order without gaps.
– A valve location always occupies one address.
– Counting beginning from left to right (orientation:
position of multipin connection is on the left on the
basis block).
3.2 Individual connection
Fitting
Insert the socket onto the terminal lugs of the valve sole-
noid until it snaps into place.
Removing
Press the locking hook on the socket and hold it down. Pull
the socket away from the valve solenoid (see diagram).
1
Socket
2
Locking hook
20
2
Festo MH.-... 0108NH English
1