Dell PowerEdge R330 Manual Del Propietário página 111

Figure 66. Removing the iDRAC port card
1 screw
3 iDRAC port card board
5 tabs on the iDRAC port
7 iDRAC port card connector
Next steps
1 Install the iDRAC port card.
2 Install the cooling shroud.
3 If disconnected, reconnect the network cable.
4 Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Installing the optional iDRAC port card
Installing the cooling shroud
2 iDRAC port
4 SD vFlash media card slot
6 slots on the chassis
8 iDRAC port card holder
Instalación y extracción de los componentes del sistema 111