Dell PowerEdge R330 Manual Del Propietário página 154

Figure 106. Install the system board
1 touch point (2)
3 system board
Next steps
1 If required, install the Trusted Platform Module (TPM). See, the Installing the Trusted Platform Module section.
2 Reinstall the following components:
a expansion card riser
b memory modules
c heat sink and processor
d cooling shroud
e iDRAC port card, if removed
f internal dual SD module, if removed
3 Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed through the cable routing latch.
154 Instalación y extracción de los componentes del sistema
2 screw (8)