Pautas Generales Para La Instalación De Módulos De Memoria - Dell PowerEdge R330 Manual Del Propietário

Memory bus operating frequency can be 1600 MT/s, 1866 MT/s, 2133 MT/s, or 2400 MT/s depending on the following factors:
• System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
• Maximum supported memory module frequency of the processors
The system contains four memory sockets — two sets of 2–sockets each. Each 2–socket set is organized into one channel. In each 2-
socket set, the first socket release lever is marked white and the second socket release lever is marked black.
Figure 23. Memory socket locations on the system board
Memory channels are organized as follows:
Processor 1
channel 0: memory sockets A1 and A3
channel 1: memory sockets A2 and A4
The following table shows the memory populations and operating frequencies for the supported configurations:
Table 20. Memory populations and operating frequencies for the supported configurations
Memory module type
ECC (UDIMM)
Pautas generales para la instalación de módulos de memoria
El sistema es compatible con Flexible Memory Configuration (Configuración flexible de la memoria), permitiendo al sistema que se configure
y ejecute en cualquier configuración de arquitectura de conjunto de chips válida. A continuación se indican las pautas recomendadas para la
instalación de los módulos de memoria:
66 Instalación y extracción de los componentes del sistema
Memory modules
populated per channel
1 1600, 1866, 2133, 2400
2 1600, 1866, 2133, 2400
Operating frequency (in
MT/s)
1.2 V
Maximum memory module ranks
per channel
Dual rank or single rank
Dual rank or single rank