Cubierta Del Sistema; Removing The System Cover - Dell PowerEdge R330 Manual Del Propietário

Figure 13. Installing the optional front bezel
1 lock

Cubierta del sistema

Removing the system cover

Prerequisites
1 Ensure that you follow the
2 Turn off the system, including any attached peripherals.
3 Disconnect the system from the electrical outlet and peripherals.
4 If installed, remove the front bezel.
Steps
1 Turn the latch release lock to the unlock position.
2 Lift the latch and rotate the latch toward the back of the system.
The system cover slides back, disengaging the tabs on the system cover from the slots on the chassis.
3 Hold the cover on both sides, and lift the cover away from the system.
56 Instalación y extracción de los componentes del sistema
Instrucciones de seguridad.
2 front bezel