Bartscher 18340D Manual Del Usuario página 53

Open door mode

When the oven door is opened, the device is in the open door mode.

in that mode the digital display shows no values, only fan and lighting are
activated.

When the oven door is closed and OP 60 is selected (inactive door reset), the
device is ready for preset or manually set cooking cycle. The device switches to
the pause mode.

In all modes the device switches to the open door mode when OP 61 is set
(active door reset).

Opening and closing the oven door gives no information about the manual or preset
cooking program.
Pause mode

That mode allows for pausing the ongoing cooking cycle in order to try or stir
the food.

If during a manual / initially set cooking cycle, the microwave oven door is opened
and then closed again or „Pause/STOP/ Reset" button is pressed, the device
enters the pause mode.

When the device is in the pause mode, the remaining cooking time is shown on
the display.

When no button is pressed and oven door is not opened or closed, the device
changes after running in OP 4 (buttons/display) the set cooking time (preset to
60 seconds) in the standby mode.
When "START" button is pressed, the device immediately switches to the input
mode.
Manual input mode

In that mode the user may manually input the cooking time and power level.

When the device is in the ready mode, pressing "
mode allowing for setting the cooking time required for selected food.

When the device is in that mode, the digital display shows entered cooking time,
e.g. "00:30".

Press buttons "0% / HOLD", "20% / DEFROST", "50% / MEDIUM" or
"70% / MED-HI" to select required power level.
The digital display shows the corresponding power.
When the same button is pressed twice, power is increased to "PL10".
" switches to the manual input
- 49 -