Bartscher 18340D Manual Del Usuario página 55

Quick start mode

When the device operates and OP 51 (quick start active) is selected, after pressing
one of numeric buttons the saved cooking program is activated automatically.

The digital display shows the corresponding power.

When the cooking program is realized, the device switches to the cooking cycle end.
Programming mode
That mode allows the user to program the cooking times and power levels for the
individual numeric buttons.

Open the door and press "1" button for 5 seconds to hear the single acoustic signal
and go to the programming mode.

The digital display shows "PROGRAM". Now it is possible to set the required
cooking time.

Press buttons "0% / HOLD", "20% / DEFROST", "50% / MEDIUM" or
"70% / MED-HI" to select the required power level.
The digital display shows the corresponding power.
When the same button is pressed twice, power is increased to "PL10".
When no power is selected, the digital display shows "PL10" which is the
standard setting.
Hint: First set the cooking time, then select power level.

To change the cooking coefficients press "x2" button, the digital display
shows "CF:XX". The default setting is 80%.
The digital display shows "CF:08". To change that setting press one of the
numeric buttons once.

After setting the cooking time and power press "START" button to save the cooking
program. When the program is saved, the digital display shows "PROGRAM".

When the selected cooking time, set as OP 7 (maximum cooking time) exceeds the
maximum cooking time of 60 minutes, during saving the short acoustic signal is emitted
3 times to indicate that the cooking time must not be used. The digital display again
shows "PROGRAM".
The entered cooking time is not changed.
- 51 -