General Instructions; Risk Of Burns - GYS POWERDUCTION 110LG Manual De Instrucciones

Translation of the original instructions

GENERAL INSTRUCTIONS

This manual contains safety and operating instructions.
Please read it carefully before using the device for the first time and keep it for future reference.
Read and understand the following safety instructions before use.
Any modification or updates that are not specified in the instruction's manual should not be undertaken.
The manufacturer is not liable for any injury or damage due to non-compliance with the instructions featured in this manual.
If there is any issue or uncertainty, please consult a qualified individual to operate the equipment correctly.
This machine should only be used for heating ferrous materials within the limits indicated on the machine and in the instruction manual. The operator
must observe the safety precautions. In case of improper or unsafe use, the manufacturer cannot be held liable.
ENVIRONMENT
Operating temperature:
Use between -10 and +40°C (+14 and +104°F).
Store between -25 and +55°C (-13 and 131°F).
Air humidity:
Lower or equal to 50% at 40°C (104°F).
Lower or equal to 90% at 20°C (68°F).
Altitude:
Up to 1000 meters above sea level (3280 feet).
INDIVIDUAL PROTECTION & OTHERS
Induction heating can be dangerous and cause serious injury or death.
Induction heating exposes people to a source of heat, electromagnetic fields and light radiation that can be dangerous.
To protect oneself as well as others, ensure the following safety precautions are taken:
• To protect yourself from optical radiation and metal splashes, use a helmet or protective goggles with shade 5.
• In order to protect you from burns and radiations, wear clothing without turn-up or cuffs. These clothes must be insulating, dry,
fireproof, in good condition and cover the whole body.
• Do not wear clothing with metal fasteners, metal buttons, or metal covers of any kind.
• Wear protective gloves which guarantee electrical and thermal insulation.
• Not for use by pacemaker users.
• People wearing pacemakers are advised to not come close to the machine.
• Risk of disruption of pacemaker operations when close to the machine.
• Entry prohibited for holders of metal implants
• People wearing pacemakers are advised to not come close to the machine.
• Make sure that jewellery (especially wedding rings) or metal parts (keys, watch) do not come near the induction system and
inductor during operation.
• Remove all jewellery and other metal objects from your body before using this equipment

RISK OF BURNS

Induction heating increases the temperature of the metal very quickly!
• Do not touch hot parts or the inductor with bare hands.
• Wait for the parts and pieces to cool down before handling them.
• In case of burn, rince thoroughly with water and consult a doctor as soon as possible.
FIRE AND EXPLOSION RISKS
• Do not position the machine on, or near flammable surfaces
• Do not position the machine near flammable materials.
• Do not heat containers, vessels or pipes that contain or have contained flammable liquids or gases.
• Do not overheat parts and adhesives.
• In case of fire, use a fire extinguisher or fire blanket.
• Do not use the device in an explosive atmosphere.
• Do not heat pressurised containers.
• Keep airbags, gas cannisters or other pressurised gas containers away from the induction heating machine.»
POWERDUCTION 110LG / 160LG / 220LG EN
23