Copy A Scene; Delete A Scene; Delete All Scenes - Steren DMX-100 Manual De Instrucciones

3.4.3 Copy a scene

1. Press the PROGRAM button for 3 seconds.
2. Locate the scene at the BANK program. Use the BANK UP/DOWN arrows to
navigate between Bank programs.
3. Select the scene you want to copy
4. Locate the destination scene on BANK program. Use the BANK UP/DOWN
arrows to navigate between programs.
5. Click on the Midi/Add button and then the button of the new scene where you
want to copy.

3.4.4 Delete a scene

• Before deleting a scene, enter to the programming mode holding the PROGRAM
button for three seconds.
1. Locate the scene on the BANK program. Use the BANK UP/DOWN arrows to
navigate between programs.
2. Press and hold the AUTO button / of the while pressing the
scene you want to delete.
The action of deleting of scene is actually an action of reset to zeros all DMX channels available
in the memory of the scene. The "physical" location of the scene memory remains.

3.4.5 Delete all scenes

1. Turn off the controller. Press and hold the PROGRAM and
BANK (DOWN) buttons while you turn on the controller.
All scenes should disappear when the controller is turned on.
11