Copy A Bank; Sequence Programming; Create A Sequence (Chase) - Steren DMX-100 Manual De Instrucciones

3.4.6 Copy a bank

1. Press the PROGRAM button for 3 seconds.
2 Locate the BANK program. Use the BANK UP/DOWN arrows to navigate between
programs of Bank.
3. Press and release the Midi/Add button.
4 Locate the destination BANK program. Use the BANK UP/DOWN arrows to
navigate between programs of Bank.
The LCD screen will flash indicating that the copy was done successfully.

3.5 Sequence programming

The sequences are created using previously created scenes. The scenes become
steps within a sequence and can be arranged in any order.
It is recommended that, before programming sequences (chase), delete all the
stored memories. To do this, refer to the "Delete all sequences" section.

3.5.1 Create a sequence (Chase)

12
5. Click Music/Bank-Copy to complete the backup.
1. Press and hold the PROGRAM button for 3 seconds.
2. Press the CHASE (1 to 6) in which you want to work.
3. Change bank, if necessary, to locate a scene.