Copy A Bank To A Sequence (Chase); Add A Step To A Sequence (Chase) - Steren DMX-100 Manual De Instrucciones

4. Select the scene you want to insert.
5. Press the Midi/Add button to store. All LEDs blink 3 times.
6. Repeat steps 3 to 5 to add additional steps to the sequence. It is possible to store
up to 240 steps.
7. Press and hold the PROGRAM button for three seconds to store the sequence.

3.5.2 Copy a bank to a sequence (Chase)

1. Press and hold the PROGRAM button for 3 seconds.
2. Select the Bank you want to copy using the BANK UP/DOWN buttons.
3. Press the MUSIC/BANK COPY and Midi/Add buttons
simultaneously to copy.
4. Press and hold the PROGRAM button for three seconds to
exit programming mode.

3.5.3 Add a step to a sequence (Chase)

1. Press and hold the PROGRAM button for 3 seconds.
2. Press the CHASE (1 to 6) in which you want to work.
3. Press the button TAPSYNC/Display and the screen LCD displays the scene and
number of Bank. The scene to be added will be displayed.
4. Press the TAPSYNC/Display button again and the screen would show the
sequence that was previously selected.
13