Horizon Global CQT76245 Instrucciones De Instalación página 7

6. Tighten all M10 hex flange nuts with torque wrench to 38 Lb.-Ft. (52 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
8. Reinstall lower fascia – reinstall the lower fascia aligning tabs in lower fascia with upper fascia. Reinstall the original fasteners and reconnect all wiring removed in
step 1.
©2018 Horizon Global™ Corp - Printed in Mexico
7. Trim Lower fascia - using a tape measure, marker, and utility knife, cut a
notch in the bottom of lower fascia approximately 3-1/2'' wide by 3-1/2"
tall. See Figure 5.
3-1/2"
Bottom View Lower Fascia
Sheet 7 of 21 76245NP
C L
3-1/2"
Figure 5
09-05-18 Rev. A