Sime Planet Dewy 60 BFR Manual De Instrucciones página 126

– Setting the time
IT
ES
FR
BE
GB
– Current values
RO
RUS
– Vacation function
– Default values
– Error display
124
12
13
14
With
regulation is speeded up in an increasing sense.
15
16
17
18
NOTE:
The vacation period may be cancelled by pressing a key of the operating mode.
19
ATTENTION
The values of the following line numbers previously entered will be lost.
• Temperature and time programme
• Vacation period
Ignition lock-out
0
Rotate selector CR/OFF/EST/INV/RESET on the boiler control panel to the release position
( ) to reset operation. If the lock-out re-occurs, call an authorised Service Centre.
Safety thermostat trip
1
Rotate selector CR/OFF/EST/INV/RESET on the boiler control panel to the release position
( ) to reset operation. If the lock-out re-occurs, call an authorised Service Centre.
Heating sensor fault (SM)
68
Call an authorised Service Centre.
Insufficient water pressure
69
Reset operation using the boiler charge valve.
Plant overpressure
70
Call an authorised Service Centre.
Safety thermostat trips
1 92
Call an authorised Service Centre.
Ventilator malfunction
1 93
Call an authorised Service Centre.
No communication between the "Logica Remote Control" and the boiler.
1 95
Call an authorised Service Centre.
To set the current day of the week
(1 = Monday/7 = Sunday)
To set the current hour
To set the current minute
Once the hour is completed, the setting of the hour changes.
and keys the current hour is regulated. Pressing these keys together, the
Display and setting of the gradient of the heating characteristics curve.
When the room temperature set is not reached choose the gradient
indicated in point 2.8.3
Display of the current boiler temperature.
Display of the current power of the burner and of the current operating mode
( = = heating/ = hot-water service)
To enter the number of days of absence.
In the display the vacation symbol will be shown (
tion (1 = Monday/7 = Sunday) and on the right the number of vacation days.
During the vacation the regulator will be on the availability mode.
When the set days have elapsed, the regulator will go on to the automatic
function.
To take the setting to the default values, press the
same time for at least 3 seconds. As confirmation a sign will appear on the display.
), on the left the day of activa-
and
1 10
to
18
keys at the