Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Desert-cooler: DCP30; DCP30 Top4
O
PERATION IN SAFE CONDITIONS
Warning
Follow the described transport instructions.
Do not remove the protective nets and guards.
In case the machine is equipped with protective nets for the panel (optional) we advise not to remove them.
Inform the maintenance personnel on the procedures and on the operative methods.
If the desert cooler operates in an environment where dust is present, this latter may obstruct the air
passages and find place on the fan blades, thus reducing the machine's efficiency.
Part of the dust normally present in the air may be caught in the damp panel and deposit itself on the
bottom of the water tank. If the desert cooler is used in a dusty environment, a periodical cleansing of the
water tank should be effected.
The machine's average life is ten years. Following this period a complete revision by specialized personnel is
mandatory.
Precautions
To avoid damages during transportation, the hydraulic system of the DCP is disassembled and the electric
panel is not hooked up.
-
Do not start up the machine before having it properly fixed and having made the proper electric
connection in accordance to the current norms.
The DCP30 (Fig. 1) is not equipped with a fixed fan protection, since the desert cooler should be part of a
ventilation system. The machine should not be started unless it is hooked up to a proper system that
prevents access to the fan.
-
Do not install the machine in places with risk of explosion as described by the CEI EN 60079 norm, and
do not treat materials that generate explosive dusts, as described by the same norm.
-
The manufacturer is not responsible of damages to persons or objects caused by not having followed the
instructions contained in the present manual.
Residual risks
No residual risks are present.
HC/MIT/UgGB-0599-02/06
2006
10(96)
Publicidad
Tabla de contenido
