Usage; Machine Start Up; Maintenance General Considerations - Munters Desert cooler DCP30 Manual De Empleo

Desert-cooler: DCP30; DCP30 Top4

Usage

1. CONDITION OF USE: All desert coolers may be installed in operating environments where there
are no people under 14 years of age.
2. RISKS DUE TO MOVING PARTS: the desert-cooler DCP30 comes without the fixed protection
in front of the fan, since it should be hooked up to a ventilation system in such a way to render
access to the fan impossible. The DCP30 Top4 instead comes with an adequate protection to avoid
access to the fan blades.
3. START UP AND SHUT OFF:
4. START UP: the condition of start up corresponds to the start up condition of the machine
(command ON or I).
5. SHUT OFF: the condition of shut off corresponds to shutting off the machine (command OFF or
0).
6. SHUT OFF / EMERGENCY SHUT OFF: is obtained by shutting off the machine (command OFF
or 0).
7. MACHINE START UP: occurs with a command from the thermostat / humidity control, only in
START UP condition.
8. CLEANING: The cleaning of the machinery must be carried out with the general switch on the off
position (position OFF or 0). Eliminate eventual foreign parts from the fan blades and clean the
water tank. Do not use water jets to clean the fan, in order not to damage the electrical motor.
Maintenance
General considerations:
Qualified personnel:
Maintenance operations must be carried out exclusively by personnel with the qualification of:
- Mechanical operator or assembler, for the mechanical parts.
- Electrician, for the electrical system.
General considerations:
All maintenance operations must be carried out with the machine shut off:
- General switch on the off position.
- Fan completely stopped.
If to reach the hanging models ladders are used, they should be in norm with the current regulations.
The personnel must wear safety clothing in accordance to the local conditions:
HC/MIT/UgGB-0599-02/06
2006
16(96)