Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Desert-cooler: DCP30; DCP30 Top4
I
NSTALLATION
The desert coolers must be installed in operating environments with people over 14 years of age.
C
LIMATIC CONDITIONS
(*)
IN CASE OF SUSPECTED CONDENSATION FOLLOWING UNPACKING
.
ELECTRICAL CONNECTIONS
Installation DCP30 in raised position
The DCP30 comes with a base for ground positioning.
In the case that it is necessary to raise the vent position, to distribute the flow at a higher elevation, the
machinery may be placed on a stand or on a base.
In every case it is necessary to assure the solidity of the base to avoid its fall.
The desert cooler is positioned in the ideal place for its use, the shop's floor. Important: the floor should be
strong enough to hold the weight of the DCP30. In the other case it is necessary to make a fixed support (e.g.
a cement floor) or a movable support (e.g. a sheet metal or board floor) able to meet the conditions of stability
required for the use of the machine, which are fundamental for safety.
HC/MIT/UgGB-0599-02/06
2006
T
/ T
-25 / 55 °C
MIN
MAX
U
R
MAX
,
KEEP THE MACHINE AT ROOM CONDITIONS FOR
DCP30 on the ground
Fig8
DCP30 on a stand
Installation DCP30 Top4
95
% RH
Fig7
24
HRS WITHOUT MAKING ANY
13(96)
Publicidad
Tabla de contenido
