Sheath Assembly; Electrical System; Electrical System Layout; Panel Composition - Munters Desert cooler DCP30 Manual De Empleo

Desert-cooler: DCP30; DCP30 Top4

Sheath assembly

The perforated sheath for the distribution of fresh air is made with special additives to resist ultraviolet rays
and has a very high mechanical resistance; nonetheless, if it is not mounted properly, it can deteriorate in just
a short time. The sheath must follow a perfect
straight line; any curve, even small, creates a
fold which, with time and stress, may give
origin to a tear.
Fig9 Sheath installation
E
LECTRICAL SYSTEM

Electrical system layout

The electrical system layout is found in Attachment 1

Panel composition

The electrical panel is made up of:
1) 1 magnetothermal switch (motor saving) to protect the fan's electric motor.
2) 1 magnetothermal switch (motor saving) to protect the water pump.
3) 1 contactor for activating the fan's electric motor.
4) 1 contactor for activating the water pump.
All the components have been hooked up by the manufacturer. The installer must connect the electric motor,
the water pump and eventual environment thermostats (not supplied with the standard equipment) terminals
to the electrical panel.

Electrical components hook up description

NOTE
THE OPERATION MUST BE EFFECTED BY PERSONNEL WITH THE QUALIFICATION OF ELECTRICIAN
The electric motor and the water pump come with the electric cable. The electrical panel comes with all the
necessary components already hooked up.
The installer must hook up the motor and the pump to the electrical panel, following the electrical layout
found in attachment 1.
14(96)
HC/MIT/UgGB-0599-02/06
2006