Purpose; Conditions Of Use - Munters Desert cooler DCP30 Manual De Empleo

Desert-cooler: DCP30; DCP30 Top4
P
URPOSE
Desert cooler (DCP), the Evaporative Cooler uses the principle of adiabatic cooling (water evaporation) to
cool the air.
The heart of DCP is cassettes made from evaporative media. Water is supplied to the top of the evaporative
media via distribution headers. The water flows down the corrugated surface of the media. As the warm and
dry air passes through the media it evaporates a proportion of the water and thus produces cold air. The energy
that is needed for the evaporation is taken from the air itself. The air that leaves the DCP is therefore cooled
simultaneously without any external energy supply for the evaporation.
Axial fan ensures even distribution of the cold air into the ventilation duct or directly into the building.
The cooling function can be easily switched of and the DCP can be used only to move the air within a building.
Desert cooler is suitable for installations in industrial plants and animal housing.
We recommend to have the equipment installed by competent personnel with knowledge about the climate
conditions of the given area.
Fig3 Longitudinal diffusion
For a longitudinal fresh air diffusion (fig.3), the DCP30 (fig.1) may be suspended with a sheath, on the other
hand, they may be placed alternately throughout the whole length of the room for a transversal air diffusion
(fig.4).
The DCP30 Top4 (fig. 2) are equipped with a tower and directional flaps, and as an option they may be
equipped with a flange to hold the sheath.
U
SE
(*) I
N CASE OF SUSPECTED CONDENSATION FOLLOWING UNPACKING
ROOM CONDITIONS FOR
HC/MIT/UgGB-0599-02/06
2006

Conditions of use

T / T +5 / 55
MIN MAX
U
R
MAX
24
HRS WITHOUT MAKING ANY ELECTRICAL CONNECTIONS
Fig4 Transversal diffusion
°C
95 % RH
,
KEEP THE MACHINE AT
.
9(96)