Maintenance; Maintenance After Each Simulation Session - Laerdal SimJunior Instrucciones De Uso

Maintenance after each Simulation Session

The following preventive measures are required to ensure longevity of
the SimJunior Simulator.
– Power off the SimPad, Link Box and PCs
– Charge batteries if necessary
– Flush the IV-arm system and drain the IO leg (leave the plug in the
bottom of the IO leg open)
– After each session where the IV-arm has been used, flush the IV
arm with 60% Isopropanol alcohol or 70% ethanol
– Wipe the skin with a moist cloth
– Remove wet clothes or linens
– Remove tape residue with a moist cloth or rubbing alcohol
– Based on the use of the Simulator, replace modules that are
consumed or damaged
– Replace cables or connectors showing visible damage
– Servicing should be performed by qualified personnel at regular
intervals
Always perform a service:
– If liquids have been spilled in or on the Simulator
– After use in dusty environments
Note: For information on and spare parts, see section: Spare
Parts and Accessories.
Before Storage or Shipping
– Flush the IV arm with 60% Isopropanol alcohol or 70% ethanol.
Open the drain valve on the bottom of the Simulator's right foot.
All manuals and user guides at all-guides.com

Maintenance

12