Charging The Simulator Battery; Replacing The Chest Rise Bladder; Replacing The Lung Bladder - Laerdal SimJunior Instrucciones De Uso

Charging the Simulator Battery

The Simulator battery charges itself as it is operated. If necessary, the
Simulator battery can be charged using an optional external power
adapter.
1. Power down the Simulator via the Link Box.
2. Remove the Simulator battery from the Simulator.
3. Connect an approved external battery charger (with a power
cord that meets local specifications) to the bottom of the
Simulator battery. Connect the battery charger's power cord into
a wall outlet.
4. When the battery has finished charging, replace the battery in the
Simulator.

Replacing the Chest Rise Bladder

The Chest Rise Bladder is located in the lower end of the chest plate,
centered under the lungs.
1. Open the Torso Skin to expose the chest plate. See Opening the
Torso.
2. Disconnect the clear tubing from the Lung Bladder and remove
the Lung Bladder. For more details, see Replacing the Lung Bladder
All manuals and user guides at all-guides.com
Maintenance
14
3. Disconnect the clear tubing from the Chest Rise Bladder.
4. Discard the old bladder.
5. Insert new bladder.
6. Re-connect the tubing to the new bladder.
7. Close the torso and replace the Torso Skin.

Replacing the Lung Bladder

If leaking occurs, the Lung Bladder (in the chest cavity) should be
replaced.
1. Open the Torso Skin.
2. Disconnect the clear tubing from under each side of the lung
bladder. Refer to step 2 illustration in Replacing the Chest Rise
Bladder.
3. Disconnect the Lung Bladder clip from the top center.
4. Gently pull the top center portion of the Lung Bladder up from
its socket.
5. Reverse the process to install the new Lung Bladder.