Connect The Machine - Saeco Via Veneto Instrucciones De Uso

28
Disposal of appliance - Problem - Possible causes - Solutions
13 DISPOSAL
APPLIANCE
• An appliance that is no longer in use must
be rendered unworkable.
• Remove the plug and cut the mains cable
at the base.
• Take unused appliances to a qualified
disposal centre.
Problem
The machine does not work
The pump is too noisy
The coffee is too cold
The milk does not froth up
The coffee flow is too fast, and
it does not make a creamy
coffee
OF THE
Possible causes
The machine is not properly
connected to the power supply
There is not enough water in
the tank (para. 4.4)
The light (12) was off when
the switch (4) was pressed.
The filter holder was not in
place while heating up the
machine (para. 5.1-5.2)
You are using the wrong type
of milk
There is not enough coffee
in the filter holder
The coffee is not ground
finely enough
The coffee is old or
unsuitable
Solutions

Connect the machine

correctly to the power supply
Fill up the tank
Wait until the ready light
comes on
Warm up the filter holder
Check the fat content of the
milk
Add coffee (para. 5.1-5.2)
Try a different blend (Ch.6)
Try a different blend (Ch.6)