miniland baby digital camera 1.8 Manual De Instrucciones página 15

camera with the monitor again.
Note: Before starting the pairing process, make sure that the camera and the monitor are close
to each other.
Note 2: Each camera can be linked just with one monitor at a time.
Nota 3: If the monitor and the camera, for some reason, have left the factory without being
paired, you will have to do it manually adding the camera to channel 2, 3 or 4. You won't be able
to pair the camera again with channel 1 until you have paired it in another channel and remove
the channel 1 camera.
5.2.7. DELETE CAMERA
To delete one of the cameras connected, follow the next steps:
1. Press the MENU/Back
2. Press UP key or DOWN
into the sub-menu.
3. Press UP /DOWN
4. Press UP /DOWN
Note 1: If you only have one camera paired to the monitor, you won't be able to remove it.
Note 2: A channel needs to be deleted before pairing to a new camera unit.
6. MAINTENANCE
· Clean the surfaces of the camera with a soft, lint-free cloth.
· If the unit becomes dirty, use a lightly dampened cloth to wipe surfaces, taking care to not allow
water into any openings.
· Never use cleaning agents or solvents.
7. TROUBLESHOOTING
Problem
No reception on the
monitor
Only black and white
images are displayed
key and the menu icon will pop up.
key to select DELETE camera icon
key to select the desired camera to delete and press the
key to select BACK
Possible Cause
Camera not turned on
Monitor not turned on
Camera: not plugged in to the
power adapter
Monitor: The power adapter is
not plugged
Monitor out or range
Connection lost between the
monitor and a camera already
linked
A wrong camera has been
selected
Check whether the camera is
in night vision/infrared mode
icon or DELETE
Solution
Press and hold down button (III) for
2 seconds
Press and hold down the Power
button (10)
Plug in the power adapter
Plug in the power adapter
Move the monitor closer to the
camera
Link the camera with the monitor
again. See 5.2.6.
Change the camera number you are
watching. See 5.2.4.
In order to view the images in colour,
increase the level of light in the room
the camera is in or check there is
nothing covering the camera´s light
sensor (II).
15
ENGLISH
then press OK key enter
key.
icon then press key.