ANSMANN WILINE 10 Manual Del Usuario página 7

USE
QC 2.0 and USB TYPE C 3.1
higher
CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please
use the original Type-C USB cable and a suitable USB charger (normal
charge 5V and quick charge 9V). Insert the USB-A plug of the cable
into the USB charger and the Type-C plug into the WiLine 10. Then
the end-device must be placed on the WiLine 10 and the charging
process will start automatically.
The WiLine 10 has a USB Type-C port. In order to be able to use the
quick-charge 9V/1.2A output, check that your USB charger and the
end-device are compatible with this charge technology.
The speed of the charging is dependent on different factors such as
input (current and voltage) and the end-device.
The USB charger may heat up a little depending on the output power
required.
USE
WARNING
It is important that all end-devices to be charged with the wire-
ƒ
less technology are suitable for the Qi protocol.
Ensure that your end-device (smartphone or other device) is
ƒ
suitable for one of the output voltages 5V or 9V.
Note that end-devices that require more than 5W to 10W of rated
ƒ
output power will charge slower.
Quick-charge
(included)
Quick charging
capable
10W