After charging
Avoid removing the hearing aids from the charging wells by pulling the
earwire, as this could damage the connection between the earwire and
the hearing aid.
After charging
Instead, put your fingers round the hearing aid when removing it from the
Avoid removing the hearing aids from the charging wells by pulling the
charger. When you remove the hearing aid from the charger, the hearing
earwire, as this could damage the connection between the earwire and
aid turns on after a few seconds. Remember to turn it o if you are not
the hearing aid. Instead, put your fingers around the hearing aid when re-
going to use it right away. Immediately after charging, the hearing aid
moving it from the charger.
may temporarily feel warm. If you are not comfortable with this, wait
When you remove the hearing aid from the charger, the hearing aid turns
a few minutes, for the hearing aid to reach room temperature, before
on after a few seconds. Remember to turn it off if you are not going to use
putting the hearing aid on.
it right away.
Immediately after charging, the hearing aid may temporarily feel warm. If
you are not comfortable with this, wait a few minutes for the hearing aid
Maintenance indicators
to reach room temperature, before putting the hearing aid on.
Maintenance
The light indicator will flash white to indicate that the maintenance cycle
The light indicator will flash white to indicate that the maintenance cycle
is in progress (UV-C treatment/drying):
is in progress (Ultraviolet-C treatment or drying):
12
11