Kichler Bead 54 Manual De Instrucciones página 13

OPERATING INSTRUCTIONS
Step 1. Step 1. Select a location to install your handset control holder, you could Select a location to install your handset control holder, you could
install the holder as shown. (Fig. 17) install the holder as shown. (Fig. 17)
Step 2. Remove the battery cover from the handset control by screwdriver. Step 2. Remove the battery cover from the handset control by screwdriver.
(Fig.26) (Fig.26)
Step 3. To make fan operational, install two 3V CR2032 batteries (included). Step 3. To make fan operational, install two 3V CR2032 batteries (included).
(Fig. 19) (Fig. 19)
WARNING: Chemical Burn Hazard. Keep batteries away from children. WARNING: Chemical Burn Hazard. Keep batteries away from children.
NOTE: NOTE: If not used for long periods of time, remove batteries to prevent If not used for long periods of time, remove batteries to prevent
damage to the handset control. Store the control away from excessive heat damage to the handset control. Store the control away from excessive heat
or humidity. or humidity.
Fig. 17
Battery Cover
Fig. 18
CR2032 3V
CR2032 3V
Batteries
Fig. 19
54" Bead LED | 13