Accessories; Float - Balluff BTL7-T500-M-B/Z-DEXA/B-K Serie Manual De Instrucciones

BTL7-T500-M_ _ _ _-B/Z-DEX_-K_ _/KA_ _/ZA1K
Magnetostrictive Linear Position Sensor – Rod Style
7

Accessories

Accessories are not included in the scope of delivery and
must be ordered separately.
7.1

Float

Only the floats listed here may be used as magnets for
measuring the level in zone 0.
BTL2-S-6216-8P-EX
Weight 69 g
Housing Stainless steel
Pressure rating Up to 15 bar
Operating temperature –20 °C...+120 °C
Minimum density 0.6 g/cm
Immersion depth
Density = 1 g/cm (H O) ~41 mm
3
2
Density = 0.7 g/cm ~57 mm
3
BTL2-S-5113-4K-Ex
Weight 34 g
Housing Stainless steel
Pressure rating Up to 40 bar
Operating temperature –20 °C...+120 °C
Minimum density 0.7 g/cm
Immersion depth
Density = 1 g/cm 3 (H O) ~26 mm
2
Density = 0.7 g/cm ~40 mm
3
18 english
Installation position:
Cylindrical part is the top side of
the float
3
Installation position:
Raised marking on the top side of
the float
3
BTL2-S-4414-4Z-EX
Installation position:
Raised marking on the top side of
the float
Weight 34 g
Housing Stainless steel
Pressure rating Up to 20 bar
Operating temperature –20 °C...+120 °C
Minimum density 0.7 g/cm
Immersion depth
Density = 1 g/cm (H O) ~30 mm
3
2
Density = 0.7 g/cm ~39 mm
3
BTL2-S-4414-4Z01-Ex
Installation position:
Two raised markings on the top
side of the float
Weight 52 g
Housing Stainless steel
Pressure rating Up to 20 bar
Operating temperature –20 °C...+120 °C
Minimum density 0.85 g/cm
(= float density)
Immersion depth
Density = 1 g/cm (H O) ~45 mm
3
2
Density = 0.7 g/cm Immersed
3
3
3