W Orking Instructions; Reventive Maintenance - SUHNER LSA 70 Documentación Técnica

3.1.1 c /
hAnging fitting the tool
Hold spindle with retaining pin and loosen or tighten the
union nut with wrench.
3.2 w
orking instructions
To achieve an optimum grinding result, move tool
uniformly back and forth with light pressure. Ex-
cessive pressure lessens the working capability of
the machine, as well as the life of the tool.
4. S
ERvICE
4.1 P

reventive mAintenAnce

Without a tool clamped in check no-load
speed periodically and after each mainte-
nance. Even if the machine still operates
perfectly, the motor should be removed, cleaned and the
four slides checked for wear by a specialist after approx.
300 to 400 operating hours.
/ m
aINTENaNCE
17