Bartscher AT 110 Manual De Usuario página 34

Before the first use, remove the protective foil from the device. Remove the foil slowly
•
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
Place the device so that the plug is easily accessible so as to quickly disconnect the
•
device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The electrical circuit of the socket must be secured to at least 16A. Only connect
•
the device to a wall outlet; do not use any extension cords or power strips.
- 30 -