ProMed ACP Instrucciones De Empleo página 24

O
24
PeratIOn OF the devIce
intensity button (D) in the place labelled with a plus sign (+)
several times, until you have reached the desired intensity. On
DE
the display, you can see that the visual indicator (H) changes
to the next level each time the button is pressed. Once the last
LED lights up, the highest intensity has been reached. Press the
EN
intensity button in the place labelled with a minus sign (-) in order
to reduce the intensity step by step all the way down to the lowest
FR
intensity.
CAUTION
IT
The feeling of intensity may vary between different regions of the
body. Therefore, it is advisable to always lower the intensity to
ES
the lowest level prior to changing the acupuncture point!
PLEASE NOTE
NL
As conductivity may vary between different regions of the body,
it may be necessary to adjust the amount of pressure applied by
the acupuncture tip to the selected acupuncture point.
PL
PLEASE NOTE
RU
Do not forget to switch off the device after use. In case you have
used the earphone and have put it away together with the device,
only the lit LED will indicate that the device is still on. Battery use
TR
will increase if you keep the Promed ACP device switched on
while not using it.
AR
Use of device accessories
The Promed ACP device is supplied with an acupuncture tip,
an earphone and an external electrode with cable.
Acupuncture tip
The additional acupuncture tip (P) features a finer end piece with
a very narrow tip, permitting even more efficient stimulation of
the acupuncture point. This may be useful when detecting, finding
and stimulating points located very closely to each other, e.g. in
the ear. Simply attach the tip to the acupuncture tip (A) of the
device. Ensure a tight fit and contact with the device.
Earphone
The earphone (J) is plugged into the socket (I) for connection
with the Promed ACP device. Now the acoustic signal will only
be heard on the earphone.
External electrode with cable
Plug the external electrode (O) into the connection socket (L).
For individual therapy, tie the electrode around your own wrist
or arm; when treating another person, tie it around the person's
wrist or arm instead. Now you can hold the Promed ACP
device as you wish without the need to ensure contact with the
contact electrode or - when treating a partner - additionally
having to touch the other person. The closed circuit is ensured
by attaching the external electrode. This provides you with more
freedom during treatment.